How Hydropower Works
Hydroelectric power plants capture the energy of falling water to generate electricity. A turbine converts the kinetic energy of falling water into mechanical energy. Then a generator converts the mechanical energy from the turbine into electrical energy. Hydroelectric power plants range in size from "micro-hydros" systems that power only a few homes to giant dams, such as Hoover Dam, that provide electricity for millions of people.
Parts of a Hydroelectric Power Plant
Most conventional hydroelectric plants include four major components (see graphic below):
1. Dam: Raises the water level of the river to create falling water and controls the flow of water. The reservoir that is formed is, in effect, stored energy.
2. Turbine: The force of falling water pushes against the turbine blades, causing the turbine to spin. A water turbine is much like a windmill, except the energy is provided by falling water instead of wind. The turbine converts the kinetic energy of falling water into mechanical energy.
3. Generator: Connected to the turbine by shafts and possibly gears, so when the turbine spins, it causes the generator to also spin. It converts the mechanical energy from the turbine into electrical energy. Generators in hydroelectric power plants work just like generators in other types of power plants.
4. Transmission Lines: Conduct electricity from the hydropower plant to homes and businesses.
Parts of a Hydroelectric Power Plant
How Much Electricity Can A Hydroelectric Power Plant Make?
The amount of electricity a hydropower plant produces depends on two factors:
1. How Far the Water Falls. The farther the water falls, the more power it can generate. This distance is called the head, and it refers to the vertical drop between the water stored behind the dam and the water level after it passes through the turbine. A greater vertical drop allows the water to fall farther and produce more energy. The power of falling water is "directly proportional" to the distance it falls. In other words, water falling twice as far has twice the energy.
2. Amount of Water Falling. More water flowing through the turbine produces more power. The volume of water available depends on the amount of water flowing down the river. Larger rivers have more flowing water and can produce more energy. Power is also "directly proportional" to river flow. A river with twice the amount of flowing water as another river can produce twice as much energy.
Can I Figure Out How Much Energy a Dam in My Area Could Make?
Let's say that there is a small dam in your area that is not used to produce electricity. The dam might be used to provide water to irrigate farmlands, or it may have been built to create a lake for recreation. As we explained above, you need to know two things:
1. How far the water falls. From talking to the person who operates the dam, we learn the water level behind the dam is about 10 feet higher than the water level downstream, so the water falls 10 feet.
2. Amount of water flowing in the river. We contact the United States Geological Survey (USGS), the agency in the U.S. that measures river flow, and learn that the average flow in the river is 500 cubic feet per second (cfs).
Now all we need to do is a little mathematics. Engineers have found that we can calculate the power of a dam using the following formula:
Power = (Height of Dam) x (River Flow) x (Efficiency) / 11.8
Power: The electric power produced in kilowatts (one kilowatt equals 1,000 watts)
Height of Fall: The vertical distance the water falls measured in feet
River Flow: The amount of water flowing in the river measured in cubic feet per second (cfs)
Efficiency: How well the turbine and generator convert the power of falling water into electricity. Older or poorly maintained hydroelectric plants may have efficiencies around 60% (0.60), while newer, well operated plants can reach over 90% (0.90)
11.8: A constant that combines the effects of water density, gravity, and unit conversions so the calculated power is expressed in kilowatts.
For the dam in our area, let’s assume the available head is 10 feet, the river flow is 500 cubic feet per second, and the turbine-generator efficiency is 80%.
Then the power for our dam will be:
Power = (10 feet) x (500 cubic feet per second) x (0.80) / 11.8 = 339 kilowatts
To get an idea what 339 kilowatts means, let's see how much electric energy the dam could generate in a year.
Since electric energy is normally measured in kilowatt-hours (kWh), we multiply the power from our dam by the number of hours in a year.
Electric Energy = (339 kilowatts) x (24 hours per day) x (365 days per year) = 2,969,640 kWh
Assume the average annual amount of energy purchased by a residential customer (household) in the U.S. is about 10,800 kWh. Using an average of 2.5 people per household, this corresponds to 4,320 kWh per person per year. We can figure out how many people our dam could serve by dividing the annual energy production by the energy use per person:
People Served = 2,969,640 kWh total / 4,320 kWh per person = 687 people.
So, in this example, our local irrigation or recreation dam could theoretically provide enough renewable energy to meet the residential needs of 687 people if equipped with a turbine and generator.